Hyperbaric oxygen chamber operating instructions

1 Connect the power cord to the high-pressure oxygen generator and turn on thepower supply

2 Connect the high-pressure gas pipe to the output valve of the high-pressureoxygen-enriched generator, and only need to insert the gas pipe into the gas valve ofthe high-pressure oxygen machine according to the size;

3、 Connect the high-pressure air pipe to the inlet valve of the hyperbaric oxygenchamber, and simply insert the air pipe into the inlet valve of the hyperbaric oxygenchamber according to the size

4 Check whether the automatic safety valve is tightened each time in the manualsafety room, to avoid insufficient air pressure, air leakage failure, etc., only need torotate the manual safety valve and the automatic safety valve in a clockwise direction5 Turn on the switch of the high-pressure oxygen-enriched generator

6 Adjust the oxygen inhalation time that suits you;

8. Open the entrance of the hyperbaric oxygen chamber and enter the chamber;9, After entering the hyperbaric oxygen chamber, close the external zipper and theinternal zipper from outside to inside;

7 Open the external and internal zippers of the hyperbaric oxygen chamber;

10, After entering the hyperbaric oxygen chamber, breathe hyperbaric oxygen in theoxygen chamber;

11, Before exiting the cabin, be sure to press the automatic safety valve to reducepressure and vent the air before exiting the cabin

12, Or someone outside the cabin can help turn off the oxygen machine and tumn themanual safety valve counterclockwise to decompress and release the gas. Thehyperbaric oxygen chamber can only be discharged after the gas has been vented